Skip to content
Black Friday-20% with code
Total items in cart: 1

What is the best method for sharpening a knife?

Service Client

For sharpening a knife with precision, a whetstone remains one of the most complete methods. It allows you to work directly on the blade edge, respect its original angle, and choose the level of finish. However, a guided professional sharpener is simpler to use, while a diamond honing steel is very practical for regular edge maintenance.

The best tool therefore depends on the condition of the knife and your experience. A slightly dull blade does not require the same work as a heavily worn edge. The goal is always the same: restore a clean cut while removing as little metal as possible.

Whetstone, sharpener, or honing steel: which method should you choose?

Tool Main use Advantage
Whetstone Complete sharpening and finishing Very precise control of the edge
Professional sharpener Guided sharpening Easy angle retention
Diamond honing steel Touch-ups and routine maintenance Quick to use in the kitchen

If the knife hardly cuts at all anymore, it is better to work with a stone or an abrasive system that can re-form the edge. The honing steel is more suitable when the blade is only beginning to lose its bite.

The whetstone: the most precise method

Sharpening on a stone consists of sliding the bevel against an abrasive surface. With each pass, a very small amount of steel is removed until a fine, even edge is restored.

The whetstone Maison Damas features two complementary grits: a 1000 grit for restoring the edge of a dull knife and a 6000 grit for refining the finish. It comes with a non-slip base and an angle guide.

This method is especially valuable for Japanese knives, as it allows you to follow the blade geometry precisely. It simply takes a little practice before achieving a perfectly consistent motion.

How do you sharpen a knife on a stone?

  1. Prepare the stone according to its instructions and place it on a stable surface.
  2. Position the blade while respecting the bevel angle.
  3. Work from heel to tip with a slow, continuous motion.
  4. Maintain moderate pressure rather than forcing down on the surface.
  5. Repeat on the other side to achieve an even edge.
  6. Finish with the fine grit to improve the edge finish.

Depending on the type of stone, water preparation may be required before use. You should therefore always follow the instructions specific to the product being used.

The most common mistake is changing the wrist angle from one stroke to the next. The bevel then becomes rounded and the result lacks precision. When sharpening properly, consistency matters more than speed.

The professional sharpener: a more accessible alternative

Freehand sharpening may take a few tries before you master the angle. A guided system makes this step easier by keeping the blade in a predefined position.

The Maison Damas professional sharpener lets you choose between 15°, 18°, 20°, and 22°. Its magnetic base holds the knife in place, and its 300- and 600-grit diamond surfaces let you work the edge and then refine it.

This is an interesting method for beginners, but also for anyone who owns several knives and wants to easily reproduce the same setting from one maintenance session to the next.

What are the benefits of a guided system?

  • maintaining the angle requires less technique;
  • the motion is easy to repeat;
  • several angles are available depending on the blade;
  • the two grits allow for several steps;
  • the result is more consistent when you lack experience with whetstones.

It remains important not to make too many passes. A diamond abrasive is effective: a few controlled strokes are better than unnecessarily prolonged work.

Which angle should you choose for sharpening?

The angle affects both the fineness of the edge and its durability. The smaller it is, the finer the edge. A more open geometry retains more material behind the edge and can offer greater robustness depending on use.

Maison Damas Japanese knives are sharpened to 15° on each side. This angle should therefore be maintained during future maintenance to preserve their cutting performance.

Type of knife Indicative angle per side
Maison Damas knives 15°
Japanese kitchen blade About 10 to 16° depending on the model
European knife About 15 to 20°
Use requiring greater robustness Often 20° or more

These values are reference points. Before sharpening another model, it is better to check the manufacturer’s recommendation rather than systematically applying the same angle.

The honing steel: useful for maintaining the edge

The honing steel is often found in professional kitchens. It allows for quick intervention when the knife is still cutting properly but is beginning to lose some of its efficiency.

Not all honing steels are the same, however. A classic steel model is mainly used to maintain or realign the edge. A diamond-coated surface has an abrasive action and slightly removes metal.

The Akita sharpening steel uses diamond crystals. It is therefore a practical tool for restoring sharpness between more complete sharpening sessions.

How do you use a diamond honing steel?

Hold the honing steel steady, then position the knife at the angle corresponding to its bevel. Slide the blade from heel to tip with light pressure, then alternate sides.

There is no need to reproduce the extremely fast motions sometimes seen with certain chefs. For home use, a few slow, regular passes make it easier to control pressure and angle.

Sharpening and honing: what’s the difference?

The words “sharpening” and “honing” are often used as synonyms. In practice, the most useful distinction is whether you are actually removing metal to re-form the bevel or simply refining the edge.

A stone, a wheel, or a diamond surface is abrasive. It acts directly on the steel. Some maintenance tools, on the other hand, have a gentler effect and are mainly used to extend cutting performance.

The choice of method therefore depends more on the result you want than on the wording used.

How do you know if a blade needs sharpening?

It is better not to wait until a knife becomes completely ineffective. Several simple tests can help you monitor the condition of the edge:

  • the blade slips on a tomato before cutting through the skin;
  • herbs are crushed instead of being cleanly sliced;
  • the knife requires more pressure during cutting;
  • a sheet of paper tears during the test;
  • some areas of the edge cut better than others.

Intervening early enough limits the number of passes required and allows less steel to be removed.

Which grit should you use?

The choice of grit depends on the condition of the knife. A very abrasive surface works the metal quickly, while a fine grit is more suited to improving the finish.

  • coarse grit: for a damaged blade or significant work;
  • around 1000 grit: for regular sharpening;
  • 3000 to 6000 grit: for refining and polishing the edge.

There is therefore no need to systematically use the most aggressive abrasive. Adapting the tool to the actual condition of the blade helps preserve its service life.

Can you sharpen a knife without a sharpener?

Yes. Whetstones are in fact a manual method that requires no guided device. They simply require more skill to maintain the correct angle.

There are also various tricks, such as using the unglazed part of a ceramic object. This can help in a pinch, but control over the surface, grit, and pressure remains very limited.

For fine blades, it is preferable to use knife tools and accessories specifically designed for their maintenance.

Common mistakes during sharpening

  • Constantly changing angle: the bevel becomes uneven.
  • Pressing too hard: this removes more metal than necessary.
  • Choosing an abrasive that is too coarse: always match the grit to the condition of the edge.
  • Neglecting the tip: the full length of the blade must be worked.
  • Making too many passes: stop once the desired result has been achieved.

How can you keep the edge sharp for longer?

Good maintenance helps space out honing sessions. In the kitchen, use a wooden cutting board or a suitable synthetic material whenever possible. Glass, stone, and ceramic are much harsher on the edge.

Also wash your knives by hand and dry them quickly. When storing them, avoid letting the blades strike other metal utensils.

These simple habits protect the edge and reduce how often it becomes necessary to use a stone, honing steel, or another abrasive tool.

For a more precise comparison of the different solutions, also see our guide on choosing between a stone, sharpener, and honing steel for a Japanese knife.

Which method should you choose in practice?

A stone is particularly suitable if you want to master the sharpening of your knives with precision. It lets you control the angle, the grit used, and the finish, but it does require some practice.

The professional sharpener offers greater simplicity thanks to its guided system. It makes it possible to achieve consistent results without having to maintain the blade angle yourself throughout the operation.

The diamond honing steel completes these two methods for routine maintenance. Rather than looking for a single tool, it is often more effective to adapt your technique to the condition of the edge.

FAQ on knife sharpening

What is the best method for sharpening a knife at home?

A stone offers excellent control over the edge and finish. However, a guided sharpener is easier for beginners, as it makes it easier to maintain a constant angle during the process.

Which grit should you choose for a dull blade?

A grit around 1000 is generally suitable for routine maintenance of a blade that has lost its bite. A finer grit can then be used to improve the edge finish.

What angle should be used on a Japanese knife?

The value depends on the model. Maison Damas Japanese knives are prepared at 15° on each side. It is preferable to preserve this geometry during future sharpening.

Can a diamond honing steel really sharpen?

Yes. Diamond is an abrasive surface that removes a small amount of metal. However, a honing steel is mainly useful for regular touch-ups rather than restoring a heavily dulled blade.

How many strokes should be made?

There is no universal number. It depends on the type of steel, the grit, the pressure, and the condition of the edge. It is better to check the result regularly rather than systematically follow a fixed number.

How can you test sharpness after sharpening?

A sheet of paper is a simple test: the blade should cut it cleanly without tearing it. In the kitchen, a ripe tomato also makes it possible to check that it pierces the skin easily without excessive pressure.

How can sharpening intervals be extended?

Use a suitable cutting board, avoid very hard surfaces, wash knives by hand, and protect their blades during storage. Light maintenance performed at the right time also helps preserve the edge.

Your cart Total items in cart: 1
Spend more to reach free shipping!
Cart total 59,00 €
Product image Product information Quantity Product total
Miyazaki boning knife - Maison Damas
Price 59,00 €
Remove
Price 59,00 €
59,00 €
Remove
The little extras
Black Friday-20% with code BF2026
Estimated total 59,00 €

Discount code

    Tax included
    View cart

    Featured products

    Set of 3 Japanese knives - Nagoya Collection - Maison Damas
    Set of 3 Japanese knives - Nagoya Collection - Maison Damas
    Black Friday
    Save 22%
    Set of 3 Japanese knives - Nagoya Collection
    Regular price  219,00 €
    Sale price  219,00 € Regular price  283,00 €
    Chef knife and utility knife set - Miyazaki Collection - Maison Damas
    Set couteau de chef et utilitaire - Collection Miyazaki dans ses coffrets cadeaux - Maison Damas
    Black Friday
    Save 15%
    Chef and Utility Knife Set - Miyazaki Collection
    Regular price  159,00 €
    Sale price  159,00 € Regular price  188,00 €
    Akashi santoku knife - Maison Damas
    Couteau santoku Akashi dans son coffret cadeau - Maison Damas
    Black Friday
    Akashi santoku knife
    Regular price  119,00 €
    Sale price  119,00 € Regular price